Two years ago Teddy and I purchased a set of game boards from an internet website. It is an excellent set and well made. However, since I am somewhat of an internet nerd as well as a retiree with time on his hands, I continued to a search the web every so often just to check out P&J boards. This led to me to last winter discovering a seller making boards from "Corian". So then I began to muse on what would be the ultimate P&J board set and my tiny brain seized on polished aluminum. I could find no such thing on the web and began to wonder how difficult, and expensive, it would be to make them myself. All of the other guys here at Havasu Falls told me that I was crazy to even consider it...but then again they pretty much think me to be nuts anyway.

In late November I ordered eight pieces of 6061-T6 extruded aluminum bar 3/4" x 3" x 13" from a metal supplier in Seattle, Washingon.
I drew up plans on my computer and then made a couple of prototypes from pine using my jig saw. I then borrowed a tabletop drill press and set up shop right here in the trailer. Using 3/16" jobber's bullet drill bits & Tap Magic Aluminum Cutting Fluid, I drilled and countersunk all 216 holes without breaking a single bit. I then rough cut the first board and quickly came to the conclusion that I was not going to be able to cut them by hand. Having come this far there was no turning back so I found a local machinist to cut and mill the boards. When he was finished I had them polished and the result is downright beautiful, albeit expensive. I then sealed them to prevent oxidation & tarnishing.
Here is a photo of a mock set-up for eight players.
So in retrospect, I'm happy and proud of the way the boards turned out...everyone that sees them oohs and aahs. They are more than game boards, they are art.
"Would I do it again?"
Considering the expense, probably not, but one thing is certain, we have what is probably the most beautiful, the most perfect and the most expen$ive Pegs & Joker set in existence.




